DriveMania 3D - FREE FIT-TEST FRAME
Porsche 904 Carrera GTS  (Carrera Digital 132 / Evolution, refs 30718)

Print this frame before you buy a body. It has the same screw posts, outline and wheel arches
as every DriveMania 3D body for this chassis - we print the same frame ourselves before every body.
If the frame fits your car, the bodies for this chassis will fit too.

FILES
- porsche-904-fit-test-frame.stl / porsche-904-fit-test-frame_bambu.3mf

PRINT
- Bambu Lab: open the .3mf project - it is already placed, oriented and set up. No supports.
- Other slicers: use the .stl, place it like in the project, no supports, PLA, 0.2 mm layers.
- About 15-30 g of filament, under an hour.

CHECK THE FIT
1. Take the stock body off your car (two screws from below).
2. Put the frame on the chassis: the pegs drop into the screw posts and the frame sits level,
   without rocking.
3. Drive the stock screws in from below - they should bite into the frame.
4. Spin the wheels by hand and push the car along the track: nothing rubs, the guide moves freely.

All good? Pick your body: https://drivemania3d.com/#porsche-904
Something off? Send a photo through the form on drivemania3d.com - we will sort it out.

LICENSE
Free for personal use. Please do not sell or re-upload this file - link to drivemania3d.com instead.
(c) DriveMania 3D
